The LaTeX2HTML Translator

Drakos/Moore

To: Symbolic References shown as Hyperized Text

Conditional Text

\begin{latexonly} and \begin{htmlonly}

Conditional text can be specified using the environments latexonly and htmlonly. These allow writing parts of a document which are intended only for electronic delivery or only for paper-based delivery.

This would be useful for example in adding a long description of a multi-media resource in the paper version of a document. Such a description would be redundant in the electronic version, as the user can have direct access to this resource.

Here is an example of the use of the latexonly environment, used earlier in this manual: \begin{latexonly}

\begin{figure}
    \begin{center}
    \fbox{\includegraphics[width=4in]{psfiles/eform.ps}}
    \end{center}
    \caption{An electronic form. Of course in the online version of this
     document the form above would be active.}
\end{figure}

\end{latexonly}

Note the warning concerning how the environment delimiters should be used in the L^ATEX source code.

\htmlonly...\endhtmlonly

This is an alternative way to specify a chunk of material intended for the HTML version only, using the old A_MS-style of delimiting environments. Use of this style is discouraged; the htmlonly environment is preferred.

\latexonly...\endlatexonly

This is an alternative way to specify a chunk of material intended for the L^ATEX typeset version only, using the old A_MS-style of delimiting environments. Use of this style is discouraged; the latexonly environment or the unscoped %begin{latexonly} construction are preferred.

Note the warning concerning how the environment delimiters should be used in the L^ATEX source code.

\latex, \html and \latexhtml

There are also shorthand notations to accomplish the same thing as in the latexonly environment and htmlonly environment, but with less typing.

• The \latex{...} command causes everything within the braces to be processed by L^ATEX, but ignored by L^ATEX2HTML.
• Conversely, the \html{...} command causes everything within the braces to be ignored by L^ATEX and processed by L^ATEX2HTML.
• Finally the command \latexhtml{...}{...} causes everything within the first set of braces to be processed exclusively by L^ATEX, with the contents of the second set of braces processed solely by L^ATEX2HTML.

Warning: Only small pieces of text work reliably in this way. With whole paragraphs or contained sub-environments, the ``conditional'' environments should be used instead.

%begin{latexonly}

Another variant of the latexonly environment is available, in which everything between %begin{latexonly} and %end{latexonly} is ignored by L^ATEX2HTML. The difference is that the latexonly environment puts the contents into a group, in which all definitions are local. There is no such scoping with the %begin...%end variant, since L^ATEX sees the initial %s simply as starting comments.

The following example should clarify what happens:

\newcommand{\A}{The letter A.}
\newcommand{\B}{The letter B.}

\begin{latexonly}
\renewcommand{\A}{Not the letter A.}
\end{latexonly}
%begin{latexonly}
\renewcommand{\B}{Not the letter B.}
%end{latexonly}

\begin{document}
\A \B
\end{document}

If you process this with L^ATEX, the result is:         The letter A. Not the letter B.

Note the warning concerning how the environment delimiters should be used in the L^ATEX source code.

Warning: Be careful when using L^ATEX commands which alter the values of counters (e.g. numbered figures or equations) in conditional text, because this may cause the counter values in the electronic version to lose synchronisation with the values of the corresponding counters in the L^ATEX version.

\begin{imagesonly}

This environment is used to put L^ATEX code into the images.tex file, to be used when generating images. Typically this is used to add commands to the preamble of images.tex, such as setting the text or background color. However code can be added at any other point as well; e.g. to change the background color of all images after a certain point in the document.

Note the warning concerning how the environment delimiters should be used in the L^ATEX source code.

\begin{makeimage}

This is a special environment which forces an image to be made of its contents. That is, one gets effectively a snapshot of a portion of a page that has been typeset using L^ATEX. Within the normal L^ATEX typeset version of the document, this environment is completely transparent, adding its contents to the page as usual.

One further important use of the makeimage environment is as follows. If a makeimage environment occurs as a sub-environment within a figure environment, then an image will not be made of the figure's contents. Instead, the contents are treated as normal text, each part being handled as if there were no figure at all, except that everything is placed within a single cell of a <TABLE>...</TABLE> construction in HTML 3.2. The contents of any \caption commands are placed between <CAPTION>...</CAPTION> tags for the <TABLE>.

Normally an image of the entire contents of the figure would be placed within the single cell of the <TABLE>. Now images are made of any subparts of those figure's contents that really need it, in particular the makeimage sub-environments. An empty makeimage sub-environment does not generate an image of itself, yet still it inhibits an image being made of the whole figure. These comments apply also to table environments.

To: Symbolic References shown as Hyperized Text

Ross Moore 1991-03-26

Processed by LaTeX2HTML-FU